Glass, solar photovoltaic industry success case
Automobile glass oven
Ⅰmain technical parameters of PVC room cover oven in automotive glass industry
1. Production process: a. push the glass cart piece by piece from the front door into the oven for preheating;B. The material collector takes the material from the discharge port at the back end. After taking the material from the whole cart, the empty cart can be taken by the door on the left and right sides;C. Turn around so repeatedly.
2、Dimension：L1900×W1200×H1750mm；
3、Temperature range：Indoor temperature～'80℃；
4、Temperature fluctuation：±2℃；
5、Temperature uniformity：±5℃；
6、Heating rate：≥10℃/min；
7、Power supply: three-phase five-wire system，380V，50HZ；
8、Gross power：5KW。
Ⅱ PVC room enclosure oven structure for automobile glass industry
1、Materials: the frame is made of 40*40 square steel;The shell is made of 2mm thick cold plate.The whole machine shell is painted.
2、Insulation layer: spread 40mm thick insulation layer around the heating layer;
3、Heating pipe: Attached with 6pcs of infrared heating pipe with cover.3 pieces shall be installed on the top, 1 piece for each side 400mm from the ground, and 1 piece for each part of material collection
4、Electric chamber: control the electric chamber to be loaded on the top of the oven;
5、Anti-collision column: there are anti-collision bars on both sides and back of the inner wall of the oven to prevent the cart from hitting the heating pipe.
6、Feeding door: two doors are used in the feeding department;
7、Feeding window: The resistant soft curtain of high temperature is installed at the feeding window;
8、A drawer type of iron drying box is added on the top, and the internal control is W800*D600*H120mm, which is used for heating part of the iron nail column in the attachment.
9、Take out empty carts: single door on both sides of the rear end can be used to take out empty carts.
Ⅲ The control system of PVC room cover oven in automobile glass industry
1、Temperature controller: using Taiwan xuanrong H721 temperature controller of digital explicit intelligent
2、Heating tube control: each group of heating tube is controlled by SSR solid relay;
3、Temperature sensor: PT100, installed at the most accurate temperature position of the product;
4、Others: all other control appliances adopt mitsubishi, omron and zhengtai brands.
Ⅳ Function of PVC room cover oven in auto glass industry
1、Over-temperature alarm: when the actual detection temperature exceeds the setting value of the over-temperature protection thermostat, automatically cut off the heating power and double protection function;
2、Audible and visual alarm: alarm lamp with buzzer.
3、Earthing protection: safety earthing protection of structural components.
4、Phase loss of power and phase sequence protection: equipped with phase sequence protector
Ⅴ Environment conditions of PVC housing oven in automobile glass industry
1、The environment temperature：0℃-40℃；
2、Relative humidity：85%RH；
3、Power supply：AC380V±10%，50Hz；
Ⅵ Training on PVC housing oven of automobile glass industry
Free technical training.
