Your Location:Home > Customer Case

Successful cases of manganese mining industry

Dried line of manganese mining industry
Main technical parameters of drying line (front section) in manganese ore industry
1、Inner size:Drying section:L20000*H150*W1000mm;
2、Dimension(around):L22300mm*H1750mm(No Motor)*W1600mm,The height from the ground to the network zone is 1250mm, the inner width is 1000mm, the feeding height is 150mm, and the length of the feeding part is 2300mm.
The drying part has a total length of 20000mm, a total of 10 sections, each of which has a length of 2000mm,
The drying area is provided with adjusting baffle in front and back.
3、Temperature range:normal temperature~'270℃(adjustable);
4、Accuracy of instrument display:≤±0.1℃;
5、Temperature fluctuation degree:≤±1℃;
6、Temperature uniformity:≤±5℃(空载no load)
7、Heating rate:≤8℃/min;
8、Air transport mode: circulation on three sides;
9、The shell temperature: shell temperature is not higher than room temperature ' 15 ℃, except the seams and the oven;
10、Power supply:380V,50HZ/Three-phase five-wire system
11、Gross power:440KW;The heat output of the previous section is 50KW and that of the rest is 40KW