Product Category
Equipment category
Industry category
Infrared tunnel/conveyor furnace
Heat treat furnaces/SIBX-SDIR8500 Powder industrial belt furnace

Scope of application:Food seasoning, feed, chemical industry

conveyor oven with melsh belt dryer/conveyor dryer/conveyor heater/conveyor furnace/heat treatment oven/melsh belt oven

Don't worry the issue of installation, you can easily built up and install by yourselves. As the conveyor furnace adopted Module design you just only connect them with each other. All cable with Corresponding marking when wiring hardly make mistakes, matched with high standard of Space plug.  Detail video, pictures and instruction always around and support with you during whole course.

Method of calculating length for tunnel oven

Length of tunnel oven(M)=Material area (m2)*Heating time/width of conveyor belt

Material area=Capacity/ stacking density (kg/m3)/stacking thickness(by our suggest)

conveyor oven is a oven uses a conveyor or belt to carry process parts or material through the primary heating chamber for rapid thermal processing. It is designed for fast drying and curing of products and is nowadays widely used. Normally a conveyor oven adopts a tunnel structure and is composed of multiple controlled zones. A conveyor furnace also features fast thermal responses, uniform and stable temperature distribution; it can heat treated parts to 800 deg. C. (may vary for different model). Belt speed of a conveyor oven can be adjusted to meet customer demands. According to different baking time requirements of various products, intelligent control system can be implemented through PLC intelligent control system. Drive frequency conversion speed regulation, can realize stepless speed change. And can prestore more than 15 groups of parameters, achieve automatic operation.

suitable for baking chemical gas and food processing industry to bake goods, substrate stress removal, ink curing, paint film drying, etc. Widely used in electronics, electrical, communications, electroplating, plastic, metal chemical, food, printing, composite,pharmaceutical, PC board, powder, immersion, spraying, glass, ceramics, wood building materials...... And so on the precision baking, drying, tempering, preheating, shaping, processing and so on.

Hot air circulation and Infrared are the main heating way for tunnel oven.

Hot air circulation is a widely used heating mode of tunnel oven at present. It uses the principle of convective conduction to heat the oven to achieve the drying and curing of the workpiece.

The working principle of infrared tunnel oven is to heat up the furnace by far infrared, and then the interior is made of ceramics and stainless steel, so that the infrared light can shine in every corner of the oven, and then heat up evenly and transmit the energy to the surface of object in short time.

Characterize  Advantages:

Conveyor belt system oven, where the uniform air-flow distribution allows a perfect drying performance along all the tunnel.

Protection device: PID self-setting, automatic constant temperature, automatic timing, timing alarm power off when the temperature arrives, over-temperature power off, leakage protection, motor overload protection, control line fuse, no fuse switch and other electrical accessories;

With intelligent temperature controller, PID automatic calculation, LED display, and SSR solid-state relay output, the accuracy of temperature can be precisely controlled.

The inner liner material is made of mirror 304# stainless steel plate. The argon arc welding can prevent dust from the machine. High temperature powder paint with 2.0mm cold binding plate for enclosure;

The inner cleanliness can reach a level of clean environment

Double over-temperature protection, more reliable safety;

Design the air duct of the oven according to the product features, with good temperature uniformity;

Fast heating time, accurate temperature stability;

Domestic first-class thermal insulation, thermal insulation technology, seal effect remarkable; As we adopted Domestic first-class material of thermal insulation and high-tech of thermal insulation, seal effect remarkable, in another side the oven in double liner, so low temperature of body shell has little effect on indoor environment temperature.

Design of floor trolley or ramp type, greatly reduce on the labor intensity;

Energy and power saving, strong safety performance.

Characteristics of the equipment

1Design according to the proportion of human engineering, easy operation, modern appearance.

2Argon Arc full Welding of all stainless Steel in Inner to prevent dust from the machine itself.

3Unique air-duct designto ensure the temperature inside is uniformity

4First-class technology of heat &thermal insulation, sealing effect is excellent.

5Double over-temperature protection, safer and more reliable.

6Rising up fast, and the temperature is stable and accurate.

7The shell temperature is low, which has little effect on the indoor environment temperature.

8According to the product set up a variety of heating and air mode, energy saving, safety and environmental protection.

9Module designEach section manipulation and operation in flexible independently can be available.

10Colors can be customized base on color card.

Technical Parameters of Industrial Oven
Type Common Clean Finishing Cure Explosion-Proof Vacuum
Temperature range 0-250℃ 0-350℃ 0-550℃ 0-700℃ 700℃
Temperature Homogeneity ±1℃ ±3℃ ±5℃ ±1.5%℃
Heating Rate ≦5℃/min ≦8℃/min ≦10℃/min 10℃/min
Energy Type electrical Gas Steam Air Energy Other
Heating Mode Electric Infrared Other
Chamber Single Twin Three Other
Sheathing Material Cold Drawing Spray-Paint Stainless S
Chamber Material Stainless S
teel 201
Stainless S
teel 304
Galvanized Sheet Other
Heat Insulating Material Aluminosilicate Rock Wool Insulating Fibre-Board Firebrick Other
Air Transport Mode Left and  Right Up and Down Front and Behind Symmetrical Left and  Right
Air Motor Position Top bottom Hindside Sidepiece Other
Number of Explosion-proof Doors One Two Other
Manual door Single Door Double Door Three Doors Other
Automatic Door Revolution door Side Sliding Door Lift door Roll-Up Door Other
Cart Type Double-Deck Cart Motor-Trolley Landing Cart Automatic Trolley Other
Power Control SSR SCR Other
Control Mode Instrument Control HMI Control Network Control Other
Timing Mode Manual Automatic Other
Safety Protection Function Overtemperature Overload Phase Sequence Earth Leakage Protection Other
Detection Function Temperature Thickness Flame Pressure Other

Main parameters can be customized according to customer requirements:

Liner size W1130*H100*L7500mm The length of the feed 1500mm
Dimensions W1500*H1450*L14000mm The length of the discharge 1000mm
Tem range RT-150℃ Length of cooling zone 7500mm
Temperature fluctuation ≤±1℃ Length of cooling zone NO
Temperature uniformity ±3℃ Control mode of heating zone Human Machine Interface
Heating rate ≤8℃/min Cooling way NO
Ultimate pressure The horizontal circurlation conveyor belt PVC belt with flange
Power supply 380V 50Hz Transfer rate Speed Promise
Total Power 45KW Way forward Continuous

Device Configuration:

Construction Standard Configuration Optional Configuration Description
Shell material 2mm thick Cold plate Stainless steel or exotic material
Surface treatment Electrostatic spray Color in optional
Material of liner 1.5mm thick 304Stainless steel
Frame Aluminum Angle iron of stainless steel
Thermal insulation material Encrypted alumina silicate cotton Glass Fiber
Control system Cooling systems 0.75KW Motor temperature、stainless steel Rotor Wind speed in adjustable
Heater Stainless steel heat pipe with radiator Optional: electricity, gas or liquid heating
Thermostat Touch screen、Space temperature control module Programmed temperature control Specify
overtemperature control Space temperature indicator Mechanical temperature control Specify
multipoint recorder No No paper or paper recorder Specify
Temperature sensor Omron K thermocouple
Control way Human Machine Interface Human Machine Interface or remote computer control Specify
Function Automatic thermostat Yes
Thermal protection Yes
Manual and automatic timing Automatic timing
sound-light alarm Yes
Ground detection Yes
Phase sequence Yes
overload protection Yes
concentration detection No (VOC) Specify
Material temperature detection No infrared thermometer Specify
Pressure inside the chamber No pressure gauge Specify
Flame pressure test No Flame detector Specify
Automatic control of air discharge No High temperature anemometer Specify

Graphic wind circulation:

Single-sided supply air type Double-face type Double-face blast with explosionproof Thermal rising type
Thermal rising type Thermal radiation type Hot air radiation Hot air radiation

Page Down:The Last One
Page UpInfrared oven/SIBX-SDIR5300 PTE tunnel furnaces
Message Online
In order to improve the quality of our products, we would like to ask you for your comments and suggestions on the quality and service of our products!