Product Category
Equipment category
Industry category
Steam heating oven
SIBX-HF18 Drying catalyst oven

Catalyst roasting high temperature oven

Chamber size:W1200MM*H10008*D1400MM

Externality size:W2000mm*H1900mm*D1800MM

Heating mode:Gas heating /Steam heating

Temperature range:Room temperature -'800C

Temperature homogeneity:≦±2.5% no load.

Scope of application:Wind generator, large motor baking, catalyst

Heat treat oven/drying machine/drying oven/large oven

Suitable for baking chemical gas and food processing industry to bake goods, substrate stress removal, ink curing, paint film drying, etc. Widely used in electronics, electrical, communications, electroplating, plastic, metal chemical, food, printing, pharmaceutical, PC board, powder, immersion, spraying, glass, ceramics, wood building materials...... And so on the precision baking, drying, tempering, preheating, shaping, processing and so on.

Structure of industrial oven

The industrial oven is an internal and external double-layer structure, the shell is an angle steel thin steel plate, and a fiber material is filled between the inner and outer double-layer shells. The fiber material used in the industrial oven is mainly aluminum silicate, and can play the role of heat preservation and form a reliable heat-insulating layer. The industrial oven is equipped with a hot air circulation system and a temperature measurement and control system.

principle of operation

The temperature is controlled by the connection between the digital display instrument and the temperature sensor. The hot air circulation system is divided into horizontal type and vertical type by using the hot air circulation air supply mode. After accurate calculation, the air source is driven by the air supply motor to send the hot air to the air duct and enter the oven studio through the electric heater, and the air suction duct after use can be used as the air source to reheat, so that the temperature uniformity can be effectively improved. If the box door is switched on and off in use, the air supply circulation system can quickly restore the operating state temperature value.

The principle of an industrial oven

When the industrial oven is working, the operator obtains the temperature value inside the industrial oven through the instrument and the temperature sensor, and operates through the control system. Compared with the ordinary heat dissipation heating method, the hot air circulation heating mode of the industrial oven has better gas flow and can speed up the drying speed of the materials in the industrial oven.

The hot air circulation system of industrial oven is composed of air supply motor, air turbine and electric heater. The air supply motor drives the air turbine to send out cold air. The cold air is heated by electric heating equipment and carries heat energy, and then enters the oven studio through the air duct.

The hot air circulation system of industrial oven is beneficial to improve the uniformity of air temperature. in the process of transporting materials at the door of industrial oven switch box, the temperature value will be affected, and the uniformity of hot air circulation system will be beneficial to restore the temperature value of working state within the maximum speed.

Daily maintenance

1.Clean the surface and inner cavity dust and keep the machine clean and hygienic.

2. Check whether the ammeter current is the same as normal, if anything, notify the repairman to repair.

3. When there is a sudden power outage, turn off the heating switch to prevent automatic start on incoming calls.

4. Check that the fan is running properly and if there is any abnormal sound, if there is an immediate shutdown of the machine and notify the repairman to overhaul.

Monthly maintenance

1.Check the vents for blockage and clean up the dust.

2. Whether the fan is running properly and whether it is reversed or not.

3. The repairman checks whether the current is normal.

4. Check that the temperature controller is accurate. If it is not accurate, please adjust the static compensation or sensor correction value of the temperature controller.

5. Check the heating pipe for damage and aging of the line.

6. Check whether the delay device is accurate and whether the error is allowed.

Characteristics of the equipment

1Design according to the proportion of human engineering, easy operation, modern appearance.

2Argon Arc full Welding of all stainless Steel in Inner to prevent dust from the machine itself.

3Unique air-duct designto ensure the temperature inside is uniformity

4First-class technology of heat &thermal insulation, sealing effect is excellent.

5Double over-temperature protection, safer and more reliable.

6Rising up fast, and the temperature is stable and accurate.

7The shell temperature is low, which has little effect on the indoor environment temperature.

8According to the product set up a variety of heating and air mode, energy saving, safety and environmental protection.

9Module designEach section manipulation and operation in flexible independently can be available.

10Colors can be customized base on color card.

Technical Parameters of Industrial Oven
Type Common Clean Finishing Cure Explosion-Proof Vacuum
Temperature range 0-250℃ 0-350℃ 0-550℃ 0-700℃ 700℃
Temperature Homogeneity ±1℃ ±3℃ ±5℃ ±1.5%℃
Heating Rate ≦5℃/min ≦8℃/min ≦10℃/min 10℃/min
Energy Type electrical Gas Steam Air Energy Other
Heating Mode Electric Infrared Other
Chamber Single Twin Three Other
Sheathing Material Cold Drawing Spray-Paint Stainless S
Chamber Material Stainless S teel 201 Stainless S teel 304 Galvanized Sheet Other
Heat Insulating Material Aluminosilicate Rock Wool Insulating Fibre-Board Firebrick Other
Air Transport Mode Left and  Right Up and Down Front and Behind Symmetrical Left and  Right
Air Motor Position Top bottom Hindside Sidepiece Other
Number of Explosion-proof Doors One Two Other
Manual door Single Door Double Door Three Doors Other
Automatic Door Revolution door Side Sliding Door Lift door Roll-Up Door Other
Cart Type Double-Deck Cart Motor-Trolley Landing Cart Automatic Trolley Other
Power Control SSR SCR Other
Control Mode Instrument Control HMI Control Network Control Other
Timing Mode Manual Automatic Other
Safety Protection Function Overtemperature Overload Phase Sequence Earth Leakage Protection Other
Detection Function Temperature Thickness Flame Pressure Other

Main parameters can be customized according to customer requirements:

Liner size W1800*L6100*H1560
Dimensions W2750*L6260*H2880
Tem range RT-500℃
Temperature fluctuation ±1°C
Temperature uniformity ±3°C
Heating rate ≤8°C/min
Circle style of wind Horizontal symmetrical circulation
Power supply 380V 50Hz
Total Power 280KW

Device Configuration:

Construction Standard Configuration Optional Configuration Description
Shell material 2mm Thick rock wool board Stainless steel or exotic material
Surface treatment Electrostatic spray Color in optional
Material of liner Thickness in 2mm 304Stainless steel
Frame Aluminium Angle iron of stainless steel
Thermal insulation material Encrypted alumina silicate cotton Glass Fiber
Control system Cooling systems 2.2KW Motor temperature Wind speed in adjustable
Heater Electric heater Optional: electricity, gas or liquid heating
Thermostat Touch screen、Space temperature control module Programmed temperature control Specify
overtemperature control Space temperature indicator Mechanical temperature control Specify
multipoint recorder No No paper or paper recorder Specify
Temperature sensor Omron K thermocouple
Control way Human Machine Interface Human Machine Interface or remote computer control Specify
Function Automatic thermostat Yes
Thermal protection Yes
Manual and automatic timing Digital display timer
sound-light alarm Yes
Ground detection Yes
Phase sequence Yes
overload protection Yes
concentration detection No (VOC) Specify
Material temperature detection No infrared thermometer Specify
Pressure inside the chamber No pressure gauge Specify
Flame pressure test No Flame detector Specify
Automatic control of air discharge No High temperature anemometer Specify

Graphic wind circulation:

Single-sided supply air type Double-face type Double-face blast with explosionproof Thermal rising type
Thermal rising type Thermal radiation type Hot air radiation Hot air radiation

Page DownSIBX-HF25 Food steam oven/vacuum oven
Page Up:The First One
Message Online
In order to improve the quality of our products, we would like to ask you for your comments and suggestions on the quality and service of our products!